Auto PAC 300: Automatic Arch Strapping Machine
A broad range of features in a reliable strapper, priced less than competing brands…The Auto PAC 300 is our newest arch strapper. It is ideal for moderate to high volume applications where 9mm (3/8″) or 12mm (1/2″) strap is the preferred material. The Auto PAC 300 is fast, consistent, and reliable. In addition, it has all the “user friendly” features, usually found on machines costing thousands of dollars more. The Auto PAC 300 is completely supported with one of the best warranties in the industry, over 99% parts availability within 24 hours, and unlimited, free telephone support for the life of the machine.
Auto PAC 300
The following features are standard on the Auto PAC 300:
- Lubrication Free Strapping Head – The strapping head never needs lubrication.
- Auto Feeding – Loading strap is automatic, activated by pressing the feed switch.
- Jam Free Automatic Re-Feeding – In the event of any feeding problems, the strap is automatically re-fed into the strapping head, and the machine returns to the ready position.
- Loop Ejection – Missed straps are automatically ejected from the machine, and the Auto PAC 300 re-sets itself.
- End of Strap Sensor – If the coil does not have enough strap to complete the cycle, the Auto PAC 300 ejects the short piece, and the machine is immediately ready for a new coil.
- Three Activation Methods – The Auto PAC 300 can be activated manually, with a foot pedal, or with a standard photocell.
- Electronic Tension – Tension is controlled electronically, yielding consistent tension.
- Improved Speed – Up to 30 cycles per minute.
- CE Certified
Specification Tables
Technical Specifications
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Dimensions: | 56.3″L x 24.4″D x 60.6″H |
| Table Height: | |
| Package Size: | Minimum- 5″W x 1 1/4″H Maximum- Depends on arch size (See chart for available sizes) |
| Weight: | 1/2 |
| Tension Range: | 5/8 |
| Speed: | 5/8 |
| Strap Size: | 3/4 |
| Core Size: | 3/4 |
| Power Requirements: | 110V, single phase 50/60 Hz |
Available Arch Sizes
| AVAILABLE ARCH SIZES (INCHES/MM) AUTO PAC 300 STANDARD UNITS | |
|---|---|
| AVAILABLE IN 1/2″ AND 3/8″ STRAP | |
| AVAILABLE FOR 1/2″ HEAVY DUTY STRAP (500 LBS. OR GREATER) | |
| NOT AVAILABLE | |
| Width Height |
25.6″ 650mm | 33.4″ 850mm | 41.3″ 1050mm | 49.2″ 1250mm | 57.0″ 1450mm | 64.9″ 1600mm | 72.8″ 1850mm | 80.7″ 2050mm | 88.6″ 2250mm |
|---|---|---|---|---|---|---|---|---|---|
| 15.7″ 400mm | |||||||||
| 23.6″ 600mm | Standard | Standard | |||||||
| 31.5″ 800mm | |||||||||
| 31.5″ 800mm | |||||||||
| 47.2″ 1200mm | |||||||||
| 55.1″ 1400mm |
Strap Width Compatibility
The Auto PAC 300 is configured for a specific strap width at the time of purchase. Available options are 3/8″ (9mm) and 1/2″ (12mm) polypropylene strapping. Unlike semi-automatic machines, which can run a range of strap widths, the Auto PAC 300 is designed to operate with the width it was ordered for and is not designed to switch between widths by simply swapping rolls. If you are currently running 3/8″ strapping and are considering a switch to 1/2″, or vice versa, contact our team to confirm compatibility before purchasing replacement strapping.
Add STRAPBLASTER® Technology for Machine Cleaning
PAC Strapping Products’ STRAPBLASTER® Technology addresses debris buildup, revolutionizing the maintenance of automatic strapping machines, delivering unprecedented operational efficiency, reliability, and ease of use.
- Customizability: STRAPBLASTER® Technology is highly customizable to fit a variety of machine models and sizes, with both manual and fully automatic options available.
- Automation: The automated system, which can be integrated with automatic machines, includes a solenoid valve and advanced PLC control for seamless operation.
- Air Pressure Adjustments: The air pressure can be fine-tuned to ensure that components remain clean without exceeding safe operating limits, protecting delicate machine parts while maintaining peak performance.
