How to Use a Wire Buckle for Strapping
Step 1: Free end of strap – First take the free end of the strap, the end coming off the dispenser, and make a loop of about 6”
Step 2: Thread the Loop – Thread the loop through the back of the buckle and around the leg or tine
Step 3: Wrap the Strap – Wrap the strap around your package or pallet and repeat the loop and thread process
Step 4: Pull the Strap – Holding strap firmly, pull tightly on the end still attached to the coil until the strap is tight. You can also use a manual tensioner to pull the strap tight
Step 5: Cut the Strap
Using a Wire Buckle Video
